Lighting

Explore 276 award-winning designs tagged Lighting on Designs And Designers.

Designer / Brand: Peng Ren Project: Timing Light Tag: Lighting

Time Lamp

Time Lamp is a table lamp with a timing function, shaped like a traditional hourglass. The lampshade is made of translucent acrylic with an optical grain and is joined by ultrasonic welding, so the light is spread evenly. Rotating the lampshade acts as the switch and selects a color temperature of 4200K or 3200K. A short touch of the button starts the timing mode, and a long touch keeps the light on. Gravity sensing and electronic slip rings let the shade turn without winding the wires. The design combines lighting with a reminder that time is passing.

Continue reading about Time Lamp Timing Light

Designer / Brand: Enza Home Design Team Project: Table Lamp Tag: Lighting

Astoria

Astoria is a table lamp made of MDF, glass and brass. The base is CNC engraved and includes a USB charging port and a pen holder. Brass parts hold the wavy glass diffuser, which spreads the light and reduces glare. The integrated LED light source has 5 watts of power and a color temperature of 3000 Kelvin. A touch button on the brass section switches the lamp on and off and dims it, so the light level can be set to suit the room. The combined functions serve a small area and reduce cable clutter.

Continue reading about Astoria Table Lamp

Designer / Brand: Giulia Liverani Project: Flexible Lamp Tag: Lighting

Stoccolma

Stoccolma is a flexible wall lamp designed to move light where it is needed. The lamp is formed by two cables held in tension between four anchor points. Each cable combines a brass wire, which gives structure and carries current, with an elastic wire that allows sliding. A circular brass disc holding an LED runs along the cables and can be turned by hand through 360 degrees. Stoccolma can light a corner, serve as a reading light beside a bed or illuminate a table. The structure removes the need for a separate power cable.

Continue reading about Stoccolma Flexible Lamp

Designer / Brand: Mona Sharma Project: Table Light Tag: Lighting

Buddy

Buddy is a table light designed for focused work. The rounded body is topped with an adjustable head that can be tilted down to light a task or angled up to provide ambient light. Brightness is controlled by a dimmer switch on the cord. Buddy is made with fused deposition modeling 3D printing, using a plant based polymer derived from sugar crops. Each light is produced in California and hand finished with water based marine paints. The compact form suits an office, a study, a bedside table or a living room.

Continue reading about Buddy Table Light

Designer / Brand: Francesca Schiavello Project: Floor Lamp Tag: Lighting

Adamas

Adamas is a floor lamp designed for home use. The lamp combines a slender metal structure with a paper lampshade. The lampshade is folded by hand from FSC parchment paper using the origami technique, and it can be removed and refitted by the user. The structure is made of square section iron tubes fixed to a circular iron base with a waxed surface. A brass cone acts as the lamp holder and joins the two parts. The parchment paper makes the light soft and warm, and the light is directed towards the ceiling. An LED E27 bulb is used.

Continue reading about Adamas Floor Lamp

Designer / Brand: Ninglu Zhang Project: Pendant Light Fixture Tag: Lighting

Blazer

Blazer embodies a felt hanging lamp concept that boasts tool-free assembly from a flat felt sheet, offering effortless scalability in mass production while minimizing material waste, thanks to its sleek rectangle design. Drawing inspiration from the sharp lines of a business suit's front cut, accentuated by a vibrant red hue to captivate attention, Blazer's minimalist silhouette guides viewers through a harmonious sequence. Enhanced by black snaps, the design strategically punctuates this fluid narrative, adding intrigue and dimension.

Continue reading about Blazer Pendant Light Fixture

Designer / Brand: Horace Lam Project: Multifunction Lamp Tag: Lighting

MABY Smart Lighting System

MABY is a modular smart lighting system designed for building decorative light sculptures. The system uses flat cells in four shapes: triangle, square, pentagon and hexagon. The cells connect to one another, so many different structures can be formed. Colored pattern plates, called MABY skin, attach to each cell to change its appearance. Brightness, color and on or off status are adjusted by touching the cells or by using a mobile application. The intent is to support creative expression at home for users of many ages.

Continue reading about MABY Smart Lighting System Multifunction Lamp

Designer / Brand: Martini Rus Ltd Project: Landscape Lamp Tag: Lighting

Lucylle

Lucylle is a landscape lamp designed for open outdoor spaces. The lamp consists of an aluminium column with two flexible conductive rods of tempered steel that carry an energy-saving frosted LED at the top. The LED is covered with an aluminium plate that reduces light pollution. The rods sway in the wind, so the light moves gently and recalls fireflies hovering above tall grass. The slender form adds light accents without visually overloading the surroundings. The lamp is fixed in the ground and needs no user operation after installation.

Continue reading about Lucylle Landscape Lamp

Designer / Brand: Nargiza Usmanova Project: Lighting Art Installation Tag: Lighting

Crystal

The art installation Crystal is made for the Yonge + St. Clair Fall Art Festival (Toronto, Canada) which is aimed to promote local businesses. The Crystal is an abstract 3d object of 3 meters in height, aimed to demonstrate the process of transformation throughout the crystal lattice. Using triangular shapes, the artist has created a volumetric structural arch resembling a crystal. To outline the shape, the structure was featured with rope knitting and illuminated by 5 meters of LED Neon Flex light from below.

Continue reading about Crystal Lighting Art Installation

Designer / Brand: Kazoo Design Project: Lighting Tag: Lighting

Swirl

The Swirl pendant lamp, designed with the delicate shape of a meringue cookie in mind, adds character to various rooms in a home. It is particularly striking when arranged in clusters above a long table or as a solo piece above a coffee table. The lamp's symmetrical structure and flowing curves, reminiscent of piped icing from a pastry bag, bring a touch of Pop Art-inspired home decor to the space.

Continue reading about Swirl Lighting

Designer / Brand: CENTRSVET Project: Track Lighting System Tag: Lighting

Infinity Module RND

Infinity Module RND is a suspended track lighting system built around a circular ring. The track is available in white and black and in diameters from 1500 to 4000 millimeters. Luminaires can be selected in different types and numbers, including diffused and directional models, for general or decorative lighting. A mechanical button fixator holds each luminaire securely and allows repositioning along the track. The low-voltage system is safe to touch, and the luminaires are dimmable through the DALI digital protocol.

Continue reading about Infinity Module RND Track Lighting System

Designer / Brand: YUJI YANAGISAWA Project: Lantern Kit Tag: Lighting

Tomori Aid

Tomori Aid is a collapsible lighting kit that turns a flashlight into a soft lantern. The kit is made of cardboard and is assembled with a simple structure and simple fixing methods. Any flashlight of a suitable size can be used, so a failed flashlight can be replaced by another one. When folded, Tomori Aid fits within an A4 size and is easy to carry in a disaster prevention bag. When assembled, the lantern measures 260 mm in height and 170 mm on each side. The design is intended for use during evacuation and in daily life at home.

Continue reading about Tomori Aid Lantern Kit